Price: $595.00
Toyota 723 TFL-K
Module or Part# |
Description |
Kit Quantity |
| 1152 | Lamp 52 1W |
2 |
| 1187 | Lamp 1487 2W |
4 |
| 1200 | 2A Circuit Breaker |
1 |
| 1205 | 5A ATC Fuse |
1 |
| 1350 | 3A Diode |
2 |
| 1400 | Flasher |
1 |
| 1500 | Switch SPST On-Off |
1 |
| 1510 | Switch DPDT On-Off-On |
1 |
| 1602 | Resistor (50 ohm) |
1 |
| 1603 | Resistor (100 ohm) |
1 |
| RELAY-1 | Relay, SPDT, N.O. or N.C. contacts |
1 |
| 2000 | Lamp (Used w/Flasher) |
1 |
| TR-1 | Transistor NPN |
1 |
| R12-BPC | 12" Red Banana Plug Patch Cords |
8 |
| B12-BPC | 12" Black Banana Plug Patch Cords |
8 |
| R24-BPC | 24" Red Banana Plug Patch Cord |
1 |
| B24-BPC | 24" Black Banana Plug Patch Cord |
1 |
Power Supply: 12V DC @ 3A Regulated Supply.
Peg Board: A 12" x 17" board made from 3/16 white acrylic. It is precision drilled with 154 holes to allow banana plug placement of modules. 11 banana sockets are soldered onto each side to allow connections with the power supply and modules.
Modules: All components are mounted on white acrylic plastic, with silk-screened labeling. Banana plugs on back for inserting and removing from test board.
Peg Board: A 12" x 17" board made from 3/16 white acrylic. It is precision drilled with 154 holes to allow banana plug placement of modules. 11 banana sockets are soldered onto each side to allow connections with the power supply and modules.
Modules: All components are mounted on white acrylic plastic, with silk-screened labeling. Banana plugs on back for inserting and removing from test board.
Specifications:
TOYOTA TRAINER
