Wooden Stand: 14 1/2" x 17 1/2"
4 3/4" high on front 7" high on back
Price: $695.00
Toyota 723 TFL-W
Module or Part# |
Description |
Kit Quantity |
| 1152 | Lamp 52 1W |
2 |
| 1187 | Lamp 1487 2W |
4 |
| 1200 | 2A Circuit Breaker |
1 |
| 1205 | 5A ATC Fuse |
1 |
| 1350 | 3A Diode |
2 |
| 1400 | Flasher |
1 |
| 1500 | Switch SPST On-Off |
1 |
| 1510 | Switch DPDT On-Off-On |
1 |
| 1602 | Resistor (50 ohm) |
1 |
| 1603 | Resistor (100 ohm) |
1 |
| Relay-1 | Relay, SPDT, N.O. or N.C. contacts |
1 |
| 2000 | Lamp (Used w/Flasher) |
1 |
| TR-1 | Transistor NPN |
1 |
| R12-BPC | 12" Red Banana Plug Patch Cords |
8 |
| B12-BPC | 12" Black Banana Plug Patch Cords |
8 |
| R24-BPC | 24" Red Banana Plug Patch Cord |
1 |
| B24-BPC | 24" Black Banana Plug Patch Cord |
1 |
Power Supply: 12V DC @ 3A Regulated Supply mounted inside stand.
Peg Board: A 3/16" white acrylic peg board mounted in slanted wooden stand for desk or table top use. Hinged top for storage of modules and leads. Peg board has 116 precision drilled holes for inserting individual modules during training. There are also 9 banana sockets soldered onto each side to allow connection with the power supply and modules.
Modules: All components are mounted on white acrylic plastic, with silk-screened labeling. Banana plugs on back for inserting and removing from test board.
Peg Board: A 3/16" white acrylic peg board mounted in slanted wooden stand for desk or table top use. Hinged top for storage of modules and leads. Peg board has 116 precision drilled holes for inserting individual modules during training. There are also 9 banana sockets soldered onto each side to allow connection with the power supply and modules.
Modules: All components are mounted on white acrylic plastic, with silk-screened labeling. Banana plugs on back for inserting and removing from test board.
Specifications:
TOYOTA TRAINER
